LED LightsIncandescent bulbs were the only choice for electricity lighting for a long time in the past. The electricity usage for these bulbs was however very high, and users endured exceptionally high energy costs. LED (light emitting diodes) technology has now thankfully heralded the era of energy-efficient lighting.

LED lighting technology uses chips that turn electric current into light. There are different types of LED chips an electrician based in Arlington, TX will recommend for your lighting fixture dependent on its use.

Here are the three kinds of LED chips used in lighting fixtures.

DIP (Dual In-Line Package) LEDs

This LED technology is the most conventional. DIP LEDs have the chip encased within hard plastic with two straight connecting pins in a parallel connection. People typically use these types of LEDs in electronics rather than for everyday lighting because of their lower efficiency compared to newer chips.

DIP LEDs generally produce approximately 4 lumens per LED.

SMD (Surface Mounted Diode) LEDs

These are the most common chips available. You can find SMD LEDs in circuit boards. One chip with three diodes can produce about 50-100 lumens per watt. In addition to the higher brightness compared to DIP chips, SMD chips can change color. They are typically used in LED recessed downlights and strips.

COB (Chip on Board) LEDs

This is the newest technology in LED chips. One COB chip typically contains at least nine diodes and provides about 100 lumens per watt making them exceptionally bright. The chips are in spotlights and floodlights. COB LEDs are however incapable of changing colors.

Apart from the lowered electricity consumption, you stand to gain with the above LED lighting chips, the bulbs are long-lasting and do not cause indoor heat build-up. This translates to more savings in buying bulbs and the energy costs of indoor cooling.

If you still have not invested in LED lighting technology, you are missing out on considerable energy savings.